Ultrasert Ⅳ (UDⅣ)
●Features
①Hold strength is maximum of all after-molding inserts
②Because of the taper-shape of the insert, setting is reliable
③Two types of ultrasert is prepared by customer demands
●Material
Brass (iron · stainless)
●Resin
Thermoplastic
●Usage
| Machines & Tools | ●Use a soldering gun ●Our thermal deposition machine with temperature control & various punches |
|---|---|
| Insertion method |
Thermocompressin
method ①Set insert nut→②Termocompression→③Complete |
Parent material size
 |
A: See the below table “A.” B: See the below table “B” C: Total length “L” + 0.05mm or more |
Note at use
Make decision to use after test because various things are considered about the hole shape of the parental material.
●Strength Reference
| Part No. | ABS | Polycarbo | ||
|---|---|---|---|---|
| Torque(Ｎ-ｍ) | Tension(N) | Torque(Ｎ-ｍ) | Tension(N) | |
| UD-43001 | 1.6 | 1471 | 2.2 | 1667 |
| UD-43501 | 2.6 | 2648 | 3.4 | 3423 |
| UD-44001 | 3.3 | 2844 | 3.9 | 3852 |
| UD-45001 | 6.5 | 3726 | 7.8 | 5198 |
| UD-46001 | 8.8 | 5394 | 11.8 | 6865 |
●Dimensions Table
UDⅣ (UltrasertⅣ)
C：Insert used total length L plus 0.5 mm or more.
| Part No. | D1 | D2 | L | A | B | Pieces / Box |
|---|---|---|---|---|---|---|
| UD-42001 | 3.6 | 3.1 | 4.0 | 6.0 | 3.2 | 8,000 |
| Part No. | D1 | D2 | L | A | B | Pieces / Box |
|---|---|---|---|---|---|---|
| UD-42601 | 4.6 | 3.9 | 5.7 | 7.0 | 4.0 | 3,000 |
| Part No. | D1 | D2 | L | A | B | Pieces / Box |
|---|---|---|---|---|---|---|
| UD-43030 | 4.6 | 3.9 | 3.0 | 7.0 | 4.0 | 5,000 |
| UD-43040 | 4.6 | 3.9 | 4.0 | 7.0 | 4.0 | 5,000 |
| UD-43050 | 4.6 | 3.9 | 5.0 | 7.0 | 4.0 | 4,000 |
| UD-43001 | 4.6 | 3.9 | 5.7 | 7.0 | 4.0 | 3,000 |
| Part No. | D1 | D2 | L | A | B | Pieces / Box |
|---|---|---|---|---|---|---|
| UD-43501 | 5.6 | 4.7 | 7.1 | 8.5 | 4.8 | 2,000 |
| Part No. | D1 | D2 | L | A | B | Pieces / Box |
|---|---|---|---|---|---|---|
| UD-44058 | 6.4 | 5.5 | 5.8 | 9.5 | 5.6 | 1,500 |
| UD-44065 | 6.4 | 5.5 | 6.5 | 9.5 | 5.6 | 1,000 |
| UD-44001 | 6.4 | 5.5 | 8.2 | 9.5 | 5.6 | 1,000 |
| Part No. | D1 | D2 | L | A | B | Pieces / Box |
|---|---|---|---|---|---|---|
| UD-45058 | 7.1 | 6.3 | 5.8 | 11.5 | 6.4 | 1,500 |
| UD-45001 | 7.1 | 6.3 | 9.5 | 11.5 | 6.4 | 800 |
| Part No. | D1 | D2 | L | A | B | Pieces / Box |
|---|---|---|---|---|---|---|
| UD-46065 | 8.6 | 7.9 | 6.5 | 14.0 | 8.0 | 800 |
| UD-46095 | 8.6 | 7.9 | 9.5 | 14.0 | 8.0 | 500 |
| UD-46001 | 8.6 | 7.9 | 12.7 | 14.0 | 8.0 | 400 |
| Part No. | D1 | D2 | L | A | B | Pieces / Box |
|---|---|---|---|---|---|---|
| UD-48001 | 10.4 | 9.5 | 12.7 | 17.5 | 9.6 | 300 |
| Part No. | D1 | D2 | L | A | B | Pieces / Box |
|---|---|---|---|---|---|---|
| UD-41001 | 11.8 | 11.0 | 12.7 | 23.5 | 11.2 | 800 |
FUⅣ (Flange UltrasertⅣ)
| Thread | Part No. | D3 | D2 | D1 | L1 | L2 | t | Pieces / Box |
|---|---|---|---|---|---|---|---|---|
| M3×0.5 | FU-43001 | 5.5 | 4.6 | 3.9 | 6.3 | 5.7 | 0.6 | 3,000 |
| M4×0.7 | FU-44001 | 7.0 | 6.4 | 5.5 | 9.0 | 8.1 | 0.9 | 1,000 |
| M5×0.8 | FU-45001 | 8.0 | 7.1 | 6.3 | 10.6 | 9.5 | 1.1 | 600 |
| M6×1.0 | FU-46001 | 9.5 | 8.6 | 7.9 | 14.0 | 12.7 | 1.3 | 300 |
| M8×1.25 | FU-48001 | 12.0 | 10.4 | 9.5 | 14.0 | 12.7 | 1.3 | 1,000 |