Japanease site   global site

Tokai Bussan Co.,Ltd. Manufacture of insertnut TOKAI MMC

Tokai Bussan Co.,Ltd.
Manufacture of insertnut TOKAI MMC

Tokai Bussan Co.,Ltd.
Manufacture of insertnut TOKAI MMC

Nutter (End of sale)

Thermal deposition machine of after-mold insert.

Insert Driver “NUTTER”

●Features

•Possible to control the thermal temperature
•High precision of burying measurements
•Inserting is simple and quick
•Decrease runout of resin
•Possible to install to such a narrow space
•Method : Embedding the item with heating
•Applied thread size:M2~M4
•Applied item size:thin and short size

●Work Prosedure Short Film

Nutter instruction manual (PDF)

Heater
Heater Souce voltage AC-100V
Frequency 50~60Hz
Demand 800W
Warmup temp Maximum(400℃)
Temp rise time After the loading 3 minutes
Hot plate measurements 160×160
Outline meanurements 200×200 H=150
Weight 2㎏

 

Driver
Driver A A type Free rotation between Bit & Grip
Driver B B type Bit & Grip are fastened, and it is low cost.

 

Bit
ビット Grip φ30×L100mm
Bit outer diameter (mm) φ7
Bit M2
M2.6
M3
M4
Bit length (mm) 60,100mm
Inserting depth(mm) 0.1mm

 

Tube
チューブ For each size

※Bit & tube are separately purchasable as consumables.

Handy-type Thermal Deposition Machine (End of sale)

andy-type Thermal Deposition Machine

●Features

Embedding temperature is kept at a certain level.
Method:Insert with heating
Applied thread size:M1.4~M10
Applied product size:all

●Work Prosedure Short Film

HandNuter Operation Manual (PDF)

Handy-type Thermal Deposition Machine Colum height 450mm
Maximum height 145mm
Stroke 60mm
Base work board 160×170mm
Souce voltage AC100V